Current Location: Home > Product Center > LEONIS Polarization Modulator 3D System X-FILTER
1. Introduction
Combined with a sliver screen, the X-FILTER Polarization Modulator allows your digital cinema projector to display 3D films. With a powered symmetrical 50 microsecond switching time between the eyes, X-FILTER easily ensures high-bright, low ghost operation at the 3D HFR (high frame rate) targets of 192FPS, 240FPS or beyond.
2.Features
l Bright, low-ghost 3D effect
l Support all DLP projectors
l Support all DCI digital cinema servers
l Faster switching speed up to 400Hz
l Simple, easy to setup and use
l Low cost due to the cheaper price of glasses
l Support Motorised support
3.Specifications
LCD Size | 262*206mm |
Contrast | 150:1 |
Screen size | 13.7m(18.5K lumen, 7KW lamp) |
Switching time | 50 usec |
Temperature | 5-52¡æ |
Heat protection | Metellic Pre-Polarizer (increases performance and lifetime) |
4.Comparison of three mainstream polarization modulator 3D systems
Leonis Cinema | MasterImage | RealD | |
Type | Polarization | Polarization | Polarization |
Left and rIght eye differentiation | X-FILTER | Rotator Polarizing Filter
| Z-Screen |
Polarization mode | Linear and Circular Polarization | Circular Polarization | Linear Polarization |
Ghost | Low | Low | Need to reduce |
Brightness losses | Small | Small | Small |
Failure rate | Low | High | Low |
Anti-disturbance | High | Low | High |
Anti-reflection | High | No need | Low |
Projecting angle | Ca.80 | Ca.75 | Ca.60 |
Figure 1: Leonis Polarization Modulator 3D System X-FILTER
Figure 2: X-FILTER on the Carriage
Figure 3: The complement glasses to X-FILTER
5. Packing List